настройка raid через bios

reboot, use the tip below if your computer stops booting.

 If you enter a wrong timing, most settings will reset on a

the MHz, voltage and timings on the package you'll be good to go.

the information will be with your RAM sticks.  If you match

wrong.  The good news is it's really easy to change as all of

RAM settings - More and more often it seems these are

correct indication of CPU  in the first screen show below,

correct, when the computer boots up, as long as it gives you the

Confirm CPU settings - Almost all of the time this is

USB, or in the case below enabling RAID modes from the SATA drives.

Feature enabling - You may have to enable things like front

to look for to find the boot record.  (Where Windows is)

Boot order - This will let the computer know which device

The key items for CMOS setup are

the yellow box below will show you how to bail yourself out if you get

called a multiplier.  Other than that, have at it, the tip in

time.  Just don't mess with voltages or increase anything

here is patience.  All BIOS screens seem to change all of the

the first couple of times you work at it.  The important thing

CMOS setup is a little intimidating